The exceptional width of the LS3880 aluminum channel from klusdesignled can accommodate various combinations of LED strips for architectural lighting. Suspend the silver anodized extrusion and use an optional frosted lens to create a diffused line of light for cove, soffit, and valance lighting.This extrusion houses up to foue 8mm strips, three 10mm strips, or a single strip up to 34mm wide. Available in lengths of 3.3 ft (1m) and 6.6 ft (2m).

TECHNICAL DRAWING

APPLICATION
- main and decorative lighting

MOUNTING
- to the surface or suspended, using dedicated accessories
- can be easily connected into runs and systems

ADDITIONAL INFORMATION
- both LED strips and LED current modules can be used
- safety due to high vibration resistance
- standard lengths of klusdesignled profiles and covers: 1000 mm (tolerance ± 1.5 mm) and 2005 mm / 3010 mm (tolerance + 5 mm); for selected covers: 6050 mm, 10050 mm (tolerance + 5 mm)
- when choosing a different length of profiles / covers than available in the standard, you should additionally choose the cutting service at klusdesignled

TECHNICAL SPECIFICATION
Material： aluminum
Accessories:    2pcs End Caps,2Sets Of Rope    
Installation:    Suspended    
Standards And Certifications:    RoHS Compliant
Strip Width:    34mm    
Lens:    Frosted
Finish:    Silver
Possible fixture shapes： linear, polygonal
Profile cross-section：rectangular
The cover is cut to the length of the profile：Yes
Can be easily connected into runs：Yes
Wire out back of extrusion：Yes
Possibility of obtaining a line of light：Yes
Building type：Commercial, Retail, Entertainment/ Arts, Hotel / Restaurant
Facility zone：office, communication routes and corridors, conference room, lobby / foyer